Before
After
Eden Sidewalk Contractors NYC repairs and replaces sidewalks across Queens, from single cracked flags in Astoria to full frontages in Jamaica and Flushing. We clear DOT violations, file the permits and see each job through to dismissal.
Get a Free Estimate
Licensed & Insured
NYC DOT requires the contractor to obtain a Sidewalk Construction Permit before any concrete is broken, and a corner property needs a separate permit for each side where work is done. Hiring a licensed contractor keeps that paperwork, and the responsibility for getting it right, off the owner’s desk.
In Queens we handle the full range: cracked flags on residential blocks in Flushing and Astoria, failed DOT inspections at storefronts, and older sidewalks in Jamaica, Forest Hills and Far Rockaway that are due for full replacement.
Eden Sidewalk Contractors NYC holds NYC DCA license #1474625-DCA and General Contractor license #612117, and has served property owners across the city for more than 25 years. Queens jobs follow the same standard as all of our sidewalk contractors NYC work: inspected, permitted, repaired and closed out.
Sidewalk services we provide for Queens homes, co-ops and commercial properties:
Case Studies
Three Queens jobs, from a crumbling frontage in Jamaica Hills to a 26-unit rental building in Sunnyside, showing how each violation was assessed, permitted and repaired.
How It Works
Estimates are free. Send us your address and a few photos, and we take it from there.
Share photos of the damage and, if you have one, the violation number from your DOT notice.
We measure the defective flags at your Queens property and give you a written price at no cost.
We pull the DOT permit, complete the work and request the dismissal inspection once it is done.
Pricing
Queens sidewalk prices depend mostly on how many square feet need replacing and the condition of the ground under the concrete. The ranges below are where most jobs fall; your written estimate after the inspection is free.
Repairs start at 25 sq. ft. (5×5), depending on location.
Standard sidewalk repairs, based on borough and site conditions.
Typical 100–200 sq. ft. jobs including labor and materials.
Priced at a per sq. ft. rate, offering better value on bigger areas.
What you pay depends on the size of the job, site conditions, materials, permits, location and scope. The figures above are typical ranges, not a quote. Your written estimate is free.
DOT Violations
When a NYC DOT inspector finds an unsafe condition in front of a Queens property, the owner receives a Notice of Sidewalk Violation. Under NYC DOT rules, property owners, not the City, are responsible for installing, repairing and maintaining the sidewalk next to their property.
The 75 days start on the date shown on the certified mail receipt, or the date the notice was posted on the property. If the defects are not fixed in time, DOT may do the repair and bill the owner.
An open violation can also get in the way of selling or refinancing a home. Once the repair is finished under a DOT permit, a dismissal inspection is requested so the violation can be removed. We manage both steps, and our guide explains how to prevent sidewalk violations in the first place.
If a City tree damaged the sidewalk in front of a one-, two- or three-family home, the City does not issue a violation or charge the owner for that repair. Eligible homeowners can request an inspection through the Trees and Sidewalks program.
Service Areas
Are you looking for sidewalk repair near me in Queens? Wherever you’re located, our nearby crews handle residential and commercial jobs across the borough, following every NYC DOT requirement.
We also repair sidewalks in the Bronx, Brooklyn and Manhattan.
No projects in that category yet.
Our Team
Our site supervisor, project foreman and crew plan, permit and complete sidewalk jobs across Queens and the rest of New York City.
From the Blog
Plain-English articles on violations, permits and costs that apply to every Queens property.
Curbs are the defined edges between sidewalks and roads. They act as a barrier between the two so that there is a safe p...
Owning a corner property in New York City may leave you scratching your head about permits. Do you need just one to repa...
In most cases, minor driveway repairs in NYC — like patching cracks or resealing — do not require a permit. However, lar...
FAQ
Answers to the questions Queens property owners ask us most. Still unsure? Call and talk it through with our team.
Most Queens sidewalk repairs are priced at $12–$18 per square foot. The minimum job is $1,700, which covers about 25 sq. ft. (a 5x5 area), and a typical replacement of 100–200 sq. ft. comes to $3,000–$5,000 with permits and labor included. You get the exact figure in a free written estimate.
Yes. The contractor needs a Sidewalk Construction Permit from NYC DOT before starting, and a corner property needs one for each side being repaired. We apply for the permits on every Queens job as part of our service.
Once permits are in hand, urgent DOT violation repairs usually start within 3–5 business days, and standard repairs within 1–2 weeks. Free estimates can often be scheduled the same day anywhere in Queens.
The property owner. NYC rules make owners responsible for installing, repairing and maintaining the sidewalk next to their property, even though pedestrians use it. We take care of the repair from inspection through DOT sign-off.
Yes. We repair the defects listed on the notice under a DOT permit and follow through to the dismissal inspection. Most Queens violations are cleared within 2–4 weeks of the project starting.
The 75 days run from the date on the certified mail receipt or the date the notice was posted on the property. If the defects are not repaired in that time, NYC DOT may perform the work itself and bill the owner, and an open violation can stand in the way of selling or refinancing the property.